# i3 - improved tiling WM

# i3 Perl documentation

- NAME
- SYNOPSIS
- DESCRIPTION
- EXPORT
  - wait_for_event($timeout, $callback)
  - wait_for_map($window)
  - wait_for_unmap($window)
  - open_window([ $args ])
  - open_floating_window([ $args ])
  - get_workspace_names()
  - get_output_for_workspace()
  - get_unused_workspace
  - fresh_workspace([ $args ])
  - get_ws($workspace)
  - get_ws_content($workspace)
  - get_focused($workspace)
  - get_dock_clients([ $dockarea ])
  - cmd($command)
  - workspace_exists($workspace)
  - focused_ws
  - sync_with_i3([ $args ])
  - exit_gracefully($pid, [ $socketpath ])
  - exit_forcefully($pid, [ $signal ])
  - get_socket_path([ $cache ])
  - launch_with_config($config, [ $args ])
  - get_i3_log
  - kill_all_windows
  - events_for($subscribecb, [ $rettype ], [ $eventcbs ])
  - listen_for_binding($cb)
  - is_net_wm_state_focused
- AUTHOR

# NAME

i3test - Testcase setup module

# SYNOPSIS

      use i3test;

      my $ws = fresh_workspace;
      is_num_children($ws, 0, 'no containers on this workspace yet');
      cmd 'open';
      is_num_children($ws, 1, 'one container after "open"');

      done_testing;

# DESCRIPTION

This module is used in every i3 testcase and takes care of automatically starting i3 before any test instructions run. It also saves you typing of lots of boilerplate in every test file.

i3test automatically "use"s `Test::More`, `Data::Dumper`, `AnyEvent::I3`, `Time::HiRes`’s `sleep` and `i3test::Test` so that all of them are available to you in your testcase.

See also `i3test::Test` (https://build.i3wm.org/docs/lib-i3test-test.html) which provides additional test instructions (like `ok` or `is`).

# EXPORT

## wait_for_event($timeout, $callback)

Waits for the next event and calls the given callback for every event to determine if this is the event we are waiting for.

Can be used to wait until a window is mapped, until a ClientMessage is received, etc.

      wait_for_event 0.25, sub { $_[0]->{response_type} == MAP_NOTIFY };

## wait_for_map($window)

Thin wrapper around wait_for_event which waits for MAP_NOTIFY. Make sure to include 'structure_notify' in the window’s event_mask attribute.

This function is called by `open_window`, so in most cases, you don’t need to call it on your own. If you need special setup of the window before mapping, you might have to map it on your own and use this function:

      my $window = open_window(dont_map => 1);
      # Do something special with the window first
      # …

      # Now map it and wait until it’s been mapped
      $window->map;
      wait_for_map($window);

## wait_for_unmap($window)

Wrapper around `wait_for_event` which waits for UNMAP_NOTIFY. Also calls `sync_with_i3` to make sure i3 also picked up and processed the UnmapNotify event.

      my $ws = fresh_workspace;
      my $window = open_window;
      is_num_children($ws, 1, 'one window on workspace');
      $window->unmap;
      wait_for_unmap;
      is_num_children($ws, 0, 'no more windows on this workspace');

## open_window([ $args ])

Opens a new window (see `X11::XCB::Window`), maps it, waits until it got mapped and synchronizes with i3.

The following arguments can be passed:

class

  The X11 window class (e.g. WINDOW_CLASS_INPUT_OUTPUT), not to be confused with the WM_CLASS!

rect

  An arrayref with 4 members specifying the initial geometry (position and size) of the window, e.g. `[ 0, 100, 70, 50 ]` for a window appearing at x=0, y=100 with width=70 and height=50.

  Note that this is entirely irrelevant for tiling windows.

background_color

  The background pixel color of the window, formatted as "#rrggbb", like HTML color codes (e.g. #c0c0c0). This is useful to tell windows apart when actually watching the testcases.

event_mask

  An arrayref containing strings which describe the X11 event mask we use for that window. The default is `[ 'structure_notify' ]`.

name

  The window’s `_NET_WM_NAME` (UTF-8 window title). By default, this is "Window n" with n being replaced by a counter to keep windows apart.

dont_map

  Set to a true value to avoid mapping the window (making it visible).

before_map

  A coderef which is called before the window is mapped (unless `dont_map` is true). The freshly created `$window` is passed as `$_` and as the first argument.

The default values are equivalent to this call:

      open_window(
        class => WINDOW_CLASS_INPUT_OUTPUT
        rect => [ 0, 0, 30, 30 ]
        background_color => '#c0c0c0'
        event_mask => [ 'structure_notify' ]
        name => 'Window <n>'
      );

Usually, though, calls are simpler:

      my $top_window = open_window;

To identify the resulting window object in i3 commands, use the id property:

      my $top_window = open_window;
      cmd '[id="' . $top_window->id . '"] kill';

## open_floating_window([ $args ])

Thin wrapper around open_window which sets window_type to `_NET_WM_WINDOW_TYPE_UTILITY` to make the window floating.

The arguments are the same as those of `open_window`.

## get_workspace_names()

Returns an arrayref containing the name of every workspace (regardless of its output) which currently exists.

      my $workspace_names = get_workspace_names;
      is(scalar @$workspace_names, 3, 'three workspaces exist currently');

## get_output_for_workspace()

Returns the name of the output on which this workspace resides

      cmd 'focus output fake-1';
      cmd 'workspace 1';
      is(get_output_for_workspace('1', 'fake-0', 'Workspace 1 in output fake-0');

## get_unused_workspace

Returns a workspace name which has not yet been used. See also `fresh_workspace` which directly switches to an unused workspace.

      my $ws = get_unused_workspace;
      cmd "workspace $ws";

## fresh_workspace([ $args ])

Switches to an unused workspace and returns the name of that workspace.

Optionally switches to the specified output first.

        my $ws = fresh_workspace;

        # Get a fresh workspace on the second output.
        my $ws = fresh_workspace(output => 1);

## get_ws($workspace)

Returns the container (from the i3 layout tree) which represents `$workspace`.

      my $ws = fresh_workspace;
      my $ws_con = get_ws($ws);
      ok(!$ws_con->{urgent}, 'fresh workspace not marked urgent');

Here is an example which counts the number of urgent containers recursively, starting from the workspace container:

      sub count_urgent {
          my ($con) = @_;

          my @children = (@{$con->{nodes}}, @{$con->{floating_nodes}});
          my $urgent = grep { $_->{urgent} } @children;
          $urgent += count_urgent($_) for @children;
          return $urgent;
      }
      my $urgent = count_urgent(get_ws($ws));
      is($urgent, 3, "three urgent windows on workspace $ws");

## get_ws_content($workspace)

Returns the content (== tree, starting from the node of a workspace) of a workspace. If called in array context, also includes the focus stack of the workspace.

      my $nodes = get_ws_content($ws);
      is(scalar @$nodes, 4, 'there are four containers at workspace-level');

Or, in array context:

      my $window = open_window;
      my ($nodes, $focus) = get_ws_content($ws);
      is($focus->[0], $window->id, 'newly opened window focused');

Note that this function does not do recursion for you! It only returns the containers on workspace level. If you want to work with all containers (even nested ones) on a workspace, you have to use recursion:

      # NB: This function does not count floating windows
      sub count_urgent {
          my ($nodes) = @_;

          my $urgent = 0;
          for my $con (@$nodes) {
              $urgent++ if $con->{urgent};
              $urgent += count_urgent($con->{nodes});
          }

          return $urgent;
      }
      my $nodes = get_ws_content($ws);
      my $urgent = count_urgent($nodes);
      is($urgent, 3, "three urgent windows on workspace $ws");

If you also want to deal with floating windows, you have to use `get_ws` instead and access `->{nodes}` and `->{floating_nodes}` on your own.

## get_focused($workspace)

Returns the container ID of the currently focused container on `$workspace`.

Note that the container ID is not the X11 window ID, so comparing the result of `get_focused` with a window's `->{id}` property does not work.

      my $ws = fresh_workspace;
      my $first_window = open_window;
      my $first_id = get_focused();

      my $second_window = open_window;
      my $second_id = get_focused();

      cmd 'focus left';

      is(get_focused($ws), $first_id, 'second window focused');

## get_dock_clients([ $dockarea ])

Returns an array of all dock containers in `$dockarea` (one of "top" or "bottom"). If `$dockarea` is not specified, returns an array of all dock containers in any dockarea.

      my @docked = get_dock_clients;
      is(scalar @docked, 0, 'no dock clients yet');

## cmd($command)

Sends the specified command to i3 and returns the output.

      my $ws = unused_workspace;
      cmd "workspace $ws";
      cmd 'focus right';

## workspace_exists($workspace)

Returns true if `$workspace` is the name of an existing workspace.

      my $old_ws = focused_ws;
      # switch away from where we currently are
      fresh_workspace;

      ok(workspace_exists($old_ws), 'old workspace still exists');

## focused_ws

Returns the name of the currently focused workspace.

      my $ws = focused_ws;
      is($ws, '1', 'i3 starts on workspace 1');

## sync_with_i3([ $args ])

Sends an I3_SYNC ClientMessage with a random value to the root window. i3 will reply with the same value, but, due to the order of events it processes, only after all other events are done.

This can be used to ensure the results of a cmd 'focus left' are pushed to X11 and that `$x->input_focus` returns the correct value afterwards.

See also https://build.i3wm.org/docs/testsuite.html for a longer explanation.

      my $window = open_window;
      $window->add_hint('urgency');
      # Ensure i3 picked up the change
      sync_with_i3;

The only time when you need to use the `no_cache` argument is when you just killed your own X11 connection:

      cmd 'kill client';
      # We need to re-establish the X11 connection which we just killed :).
      $x = i3test::X11->new;
      sync_with_i3(no_cache => 1);

## exit_gracefully($pid, [ $socketpath ])

Tries to exit i3 gracefully (with the 'exit' cmd) or kills the PID if that fails.

If `$socketpath` is not specified, `get_socket_path()` will be called.

You only need to use this function if you have launched i3 on your own with `launch_with_config`. Otherwise, it will be automatically called when the testcase ends.

      use i3test i3_autostart => 0;
      my $pid = launch_with_config($config);
      # …
      exit_gracefully($pid);

## exit_forcefully($pid, [ $signal ])

Tries to exit i3 forcefully by sending a signal (defaults to SIGTERM).

You only need to use this function if you want to test signal handling (in which case you must have launched i3 on your own with `launch_with_config`).

      use i3test i3_autostart => 0;
      my $pid = launch_with_config($config);
      # …
      exit_forcefully($pid);

## get_socket_path([ $cache ])

Gets the socket path from the `I3_SOCKET_PATH` atom stored on the X11 root window. After the first call, this function will return a cached version of the socket path unless you specify a false value for `$cache`.

      my $i3 = i3(get_socket_path());
      $i3->command('nop test example')->recv;

To avoid caching:

      my $i3 = i3(get_socket_path(0));

## launch_with_config($config, [ $args ])

Launches a new i3 process with `$config` as configuration file. Useful for tests which test specific config file directives.

      use i3test i3_autostart => 0;

      my $config = <<EOT;
      # i3 config file (v4)
      for_window [class="borderless"] border none
      for_window [title="special borderless title"] border none
      EOT

      my $pid = launch_with_config($config);

      # …

      exit_gracefully($pid);

## get_i3_log

Returns the content of the log file for the current test.

## kill_all_windows

Kills all windows to clean up between tests.

## events_for($subscribecb, [ $rettype ], [ $eventcbs ])

Helper function which returns an array containing all events of type $rettype which were generated by i3 while $subscribecb was running.

Set $eventcbs to subscribe to multiple event types and/or perform your own event aggregation.

## listen_for_binding($cb)

Helper function to evaluate whether sending KeyPress/KeyRelease events via XTEST triggers an i3 key binding or not. Expects key bindings to be configured in the form “bindsym <binding> nop <binding>”, e.g. “bindsym Mod4+Return nop Mod4+Return”.

      is(listen_for_binding(
          sub {
              xtest_key_press(133); # Super_L
              xtest_key_press(36); # Return
              xtest_key_release(36); # Return
              xtest_key_release(133); # Super_L
              xtest_sync_with_i3;
          },
          ),
         'Mod4+Return',
         'triggered the "Mod4+Return" keybinding');

## is_net_wm_state_focused

Returns true if the given window has the _NET_WM_STATE_FOCUSED atom.

        ok(is_net_wm_state_focused($window), '_NET_WM_STATE_FOCUSED set');

# AUTHOR

Michael Stapelberg <michael@i3wm.org>